Home Studio – STEREO or MONO: Which Setting Should You Choose To Record Your Voice Overs? by Mike Harrison
HOME STUDIO
STEREO or MONO: Which Setting Should
You Choose To Record Your Voice Overs?
October 8, 2015
By Mike Harrison
Voice Actor
The most often-asked question regarding voice over is “How
do I break into it?”
Running a close second is: “Do I record my voice overs in
stereo or mono?” What follows will explain all you need to know on the topic.
First, the basics.
What stereo is not: Stereo is not simply the use of two
speakers or the use of what is called a stereo audio file.
What stereo is: Stereo is a term given to sound recordings
that feature different yet, most often, similar audio on the left and right
channels. We hear “in stereo” (actually “surround,” but that’s an entirely
different discussion) because each ear picks up different sounds from different
directions.
And it’s because of our ability to hear this way that the concept
of stereo in sound recordings (aka stereophonic sound) even exists.
Again, just because we hear sound coming from two speakers
does not make what we’re hearing stereo.
DIFFERENT SOUNDS FROM STEREO
Stereo sound is made up of different,
yet usually similar sound, designed to entertain our ability to hear different
things from each ear. (Films produced in 3-D are an attempt to simulate the
depth perception provided by our two eyes, each which see the same scene yet
from a slightly different perspective.)
BUT… simply because we might record our voice on two audio
channels (sometimes called tracks), and while audio software may call it a
stereo file, it is NOT a stereo recording.
The recording simply uses
two channels to record exactly the same audio, and that’s why using a stereo
file to record a single voice is unnecessary.
FOR INSTANCE …
If we were to make a recording using two people conversing,
each using their own microphone, routing one person’s microphone to the left
channel and the other person’s microphone the right channel, that would be a
stereo recording.
If playback facilities were set up properly, we’d hear the
person on the left channel coming from the left speaker, and the person on the
right channel coming from the right speaker.
HOWEVER, if we were then to convert
the file or switch the playback to mono, both voices would be heard from both
speakers.
LISTEN TO THIS …
Ready for an aural treat? Here’s an excellent example of
stereophonic sound, recorded many years ago, when the technology was still fairly new and being
showcased. Make sure your sound system is in stereo mode and click here to listen.
As a comparison, click here for the same recording in mono.
The bottom line: For recording a single voice, it is
pointless to record using two channels (a “stereo” file), because each
channel will have exactly the same content, thus resulting in a file twice the
size as a mono file, unnecessarily.
And: What to do if your audio software defaults to creating a stereo file? No sweat. Record in the stereo file, but then convert it to mono before delivering to the client.
*(Aristides) Zaccarias and his
Orchestra, from the Living Stereo album “Dance The Bossa Nova,” ©1962 RCA
Records
———————
ABOUT MIKE
Since 1973, Mike Harrison has been
engaged professionally in several fields (radio, corporate communications multimedia
production, advertising) where work was performed in either
acoustically-treated rooms with microphones and/or semi-darkened rooms filled
with expensive equipment featuring pretty, often-blinking multi-colored lights
and various knobs, switches and buttons, and whose innate skill with said
equipment, particularly the fluency and speed with which he operates it, has
been aptly described by the words, “wip, bom, bip, bom, boop.” He also writes
pretty darned good copy.
