Home Studio: How To Edit Voice-Over Recordings A Lot Faster – With A Gaming Mouse, by Neil K. Hess

Voice Actor & Podcast Host
In my days before voice-over, I was a computer gaming nerd
(ok … so I still am).
I was always looking for a better
gaming mouse: faster, more buttons, more customizeable. I wanted to be
able to score more points, kills, whatever. 
As time went on, they got
more and more complex. And at the time of this writing, I have actually seen
a mouse with at least 18 buttons!
When I started in voice-over, I began to realize: voice over editing
stinks. Especially those longer files.
It takes a long time to get through all the material, and this
wasn’t what I wanted to do, which was speak into the mic and cash the
check.  
THE MOUSE SHORTCUT
Then one day I had a stroke of genius: What if instead
of using keyboard shortcuts for voice-over editing, I instead programmed my
gaming mouse to help me with editing? Would it help?

 

Oh … it helped. A lot!

 

I
haven’t done any thorough scientific measurement, but I think that since I have
started editing with my gaming mouse, I have shaved at least half of my
time off of voice-over editing.
Here is what I did with
my Logitech G602 gaming mouse and Adobe Audition to help make my voice-over editing
significantly faster. However, you should be able to do this with almost any
DAW and most gaming mice. 
The first thing you will need to do is install the
software and drivers that come with the mouse. For my mouse, I just
googled “Logitech g602 download” and came up with all of the drivers and
software I needed.
CHOOSE YOUR FUNCTIONS
Now you will have to do some planning. If most of
your gigs are just raw recordings that get sent off to the producer, you might only need to program your export and/or marker buttons. 
But if you are like me and end up doing a lot
of voice-over editing, exporting, converting and so on, you will want to plan
out your buttons wisely.
My mouse has eight buttons on it, so here is what I do with the Logitech G602 and Adobe Audition.

 

 

RECORD: I use the G7 button to start the recording. 

 

CLEANUP and COMPRESSION: My G8 button is my money
button. I have a series of Izotope RX6
cleanup effects, compression, EQ and all of the usual stuff. As a result, pressing this button, especially
on a longer take, ends up taking a while. But the amount of time I save having to clean up the smaller stuff in
the track is worth its weight in gold. 

 

CUT: My G9 button is my cut button. Using this key on the mouse makes cutting out
bad portions super fast and easy.

 

VOLUME CUT: My G4 key is set up to apply a favorite effect
(Ex. -30db cut) to remove or reduce an awkward breath, or to hide a place where
two cuts were spliced together.

 

NORMALIZE: My G5 key is set to normalize the track to -3db
when all of the other editing is done.

 

EXPORT: My G6 key is set to export the track.

 

G10 and G11: These two buttons can be a variety of things
depending on the project I am working on. 
Sometimes, one is set to just export a highlighted selection. Other times I use it for other things.

 

For 99% of my voice-over editing and post recording needs,
these settings do the job just fine. But
reprogramming them with the Logitech software is VERY easy. Just follow the steps below to reprogram the
buttons with a function (or set of functions) you desire.

 

TO CREATE YOUR OWN SETTINGS …
1. Open up your mouse
customization interface and click on the little arrow, which will give you a
list of options for that button. (If this is the first time you are changing the
function, you will want to select “Assign command”.)

  

2. Since most Adobe Audition/DAW commands require multiple keystrokes, you will probably want to
select “Multi Key”.

 

3. When you get to this step,
you will want to click “Start Recording”. 
Once you click that button, the mouse software records whatever buttons
you push (in the case above, for my -30db cut, I click “Shift+3”.) When you see the down or up arrow next to the
name of the key, that just tells you that the key was pushed down, or released up. If you just hit the keys as you normally do,
you should be just fine.

 

4. If you want to program in
just one keystroke, just hit the
“Keystrokes” button.
You can get a good gaming mouse for less than $50 these
days, and for the amount of time I save in voice-over editing, it has paid for
itself 10 times over. I can’t recommend enough that you give this a try. If you have any questions or suggestions let
me know!
—————–
ABOUT NEIL
Neil K. Hess is a voice-over talent and the host of the
Voices On Voice Over Podcast. He specializes in eLearning, with clients
including TIME, Hilton, ESPN & Johnson and Johnson.
Voices on Voice Over Podcast: www.voicesonvoiceover.com

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *