Home Studio: Eight Ways To Take Care Of – Including USE – Your Voice-Over Condenser Microphone, by Dan Lenard
microphone is a vital part of your audio chain. It needs to perform
consistently, day after day.
of this investment is important. Here are simple general rules
and some specifics as it relates to the vast models of studio
condenser microphones available.
enough.
mic stand before installing the mic. In other words, install the shock mount
first, without the mic.
for storage, handle it like a newborn. Be deliberate and careful.
but voice-over generally requires 7″ to 10″ distance from your lips.
mounted upside down with the top of the mic at eye level.
technique prevents plosives and breathing directly on the mic with your
hot breath. It should also allow you to not need a
pop screen. You
can use one if it makes you feel and look like a voice actor. But
unless your voice is only good at a whisper, the pop screen is a constant reminder
that you’re on mic and not being that friend next door you’d like to
have a beer with.
smoke around your mic, or anywhere, if you want the honest truth.
regions of the world are dustier than others. California is a dust
magnet. More humid climates, not so much. If your mic is mounted properly (see above), dust shouldn’t be a factor. But dust off any surfaces facing up, with a cloth.
off the 48v phantom power before connecting and disconnecting.
matter? I think plenty of people have gotten away with “whatever.” But
48 volts is a lot of energy you’re throwing onto a sensitive instrument.
Common sense would dictate being careful. I think it’s especially
important to do this with older condenser mics. Make it a habit when
disconnecting and re-connecting.
have found that you can leave them mounted in one place, literally for
years and they just keep ticking.
plugging and unplugging leads to wear and tear on the plugs, both male
and female. Constant changing of mics adds potential handling accidents.
- Most studio condenser mics we use for VO are quite hardy. If you handle them properly, they should virtually last forever.
- Clearly,
the cheaper the mic, the less quality control by the manufacturer in as
far as the materials used and how it’s assembled. The more expensive the
mic, the better its longevity. The real good ones are made by hand, for
the most part. That’s also why they’re more expensive. That, and the
selected components inside. -
Do
they fail? (see number 1 above) Sure! (not Shure) Nothing is perfect. But unless the mic was bad out of the box, except for wear and tear, they
rarely fail. - Some complain that a mic has become noisy over time. While
some mics have very low self-noise compared to others, when a mic gets
noisy, more often than not, it’s the phantom power supply that has
become faulty. That will cause hissing and clicking. Try a different interface.
to sum up, be kind to your mics and they will be kind to you.
living thing, and it doesn’t get jealous if you put it away in favor of a
new flashy model. Just remember that it’s a sensitive instrument and needs to be treated as such.
